Installation of HULK Metal Precast Magnets:
For more Precast Concrete Magnet Boxinformation, please contact us. We will provide professional answers.
1. When the magnetic box is in operation, foreign objects at the lower end should be prevented to reflect the adhesion between the magnetic box and the mold table.
This unit's magnetic box selects performance mode magnetic shielding material materials and customization, which brings a strong magnetic force chain in the magnetic circuit.
When the magnetic box is in operation, the holding surface at the lower end of the powerful magnet is firmly pressed against the steel mold platform body and held firmly.
(2) J&#;Beamless floor, represented by Southern European technology, has been widely used in civil buildings, but the seismic safety performance management can be improved.
However, when there are impurities (such as cement mortar, oil ester, polyester film) at the lower end of the powerful magnet that cannot be firmly pressed against the platform, the holding force will be greatly reduced.
2. Personal suggestions for cleaning: Before running the magnetic box, you should regularly check whether the lower end of the powerful magnet and the platform are clean and smooth.
If there are impurities at the bottom of the magnetic box, you can use a stainless steel knife to clean it (the plastic knife will be adsorbed by the resin and cannot be cleaned).
If there are materials that are difficult to clean such as cement mortar, you can use a polisher to clean it. As shown in the picture below, install the steel wire polishing disc on
the polishing machine and polish the lower end of the powerful magnet.
3. Hold it gently to prevent damage to the powerful magnet inside the magnetic box.
This is because the carbon-carbon composite material selected for the performance model of the powerful magnet is sintered from rare materials.
If you are looking for more details, kindly visit Magnetic Steel Triangle Chamfer Factory.
Its quality is similar to that of ceramics, hard and brittle, and easy to break. . Therefore, during the operation of the magnetic box,
it should be prevented from falling or smashing randomly, and it should not be separated by three pieces when removing the mold.
Avoid choosing hole-shaped shells (such as large plastic strings) that may cause damage or damage to the magnetic box and cause distortion of the magnetic box.
4. Collecting and sorting the magnetic boxes.
Personal suggestions, After the magnetic boxes have been run, handle the magnetic boxes for cleaning,
and place them on the stainless steel cart in a unified manner. Keep the magnetic boxes well cleaned to facilitate the first operation.
The magnetic box must not be placed on a plastic cart to prevent it from being stuck and unable to be removed.
5. Storage of magnetic boxes.
It is recommended that the surrounding environment for the operation and storage of magnetic boxes should not exceed 100°C,
and there should be no caustic soda solution, inorganic acid and other acidic materials nearby.
If you want to learn more, please visit our website Shuttering Magnet Factory.