HDPE

06 May.,2024

 

HDPE

High density polyethylene (HDPE) piping systems have been used for municipal and industrial water applications for over 50 years. Within PPI's Building & Construction Division, HDPE pipes are used for ground source geothermal applications, also known as earth energy or geoexchange systems.

Want more information on hdpe dredge pipe supplier? Feel free to contact us.

For other applications of HDPE piping systems, please refer to the webpages of PPI's other divisions.

Introduction

HDPE is currently produced from compounds with pipe material designation codes of PE 3608 or PE 4710, and a color and ultraviolet stabilizer code of C or E, per ASTM D3350.

Are you interested in learning more about uhmwpe dredge pipe? Contact us today to secure an expert consultation!

HDPE is available in both IPS (iron pipe size) and CTS (copper tube size) sizes. IPS sizes are more common in geothermal ground loop applications. HDPE tubing and pipe are produced in coils and straight lengths. Consult the specific HDPE manufacturer's literature and listings for appropriate pressure ratings.

Definition

High density polyethylene (HDPE) is a plastic resin made by the copolymerization of ethylene and a small amount of another hydrocarbon. The resulting base resin density, before additives or pigments, is greater than 0.941 g/cm.

The Benefits of Using HDPE Pipes for Water ...

Difficulties with Water Pipe Systems

These pipe systems ensure that the water transferred is safe from contaminants and other harmful substances. However, there are times when the hazards come from the pipe itself. For example, in systems made of metal pipes, corrosion and rust can form when water and oxygen interact with the steel or iron, contaminating the water supply. In severe cases, the damage can weaken the pipe structure and cause the pipes to break, cutting off the water supply to the rest of the network. HDPE pipe is not affected by algae, fungi or bacteria. It is highly resistant to abrasion from any solids in suspension, such as sewer waste or mining slurry. Unlike steel pipes which require internal lining, galvanising or coating, both internally and externally. Acu-Tech’s PE100 poly pipe does not corrode or tuberculate and maintains its flow capability over time, unlike steel piping, which can rust and build up resistance to flow.

Common Problems with Pipes in Rural Applications

Similar to urban water distribution systems, rural pipes ensure a safe and reliable source of water for irrigation and other comparable needs. Farm water quality is a priority in these systems, especially with factors like pH level and iron content. For example, high levels of calcium and magnesium salts cause water hardness, making it not only detrimental to soil but also harmful to pipes. The high calcium content can form lime encrustation (calcium carbonate) and hinder water transfer in the pipe. The nature of rural systems can also affect the pipes. For example, pressure surges when abruptly starting or stopping water flow can cause water hammer or hydraulic shocks that lead to damage unless pipes are properly secured or airlocks are allowed to escape.

The Benefits of Using HDPE Pipes

  • Corrosion Resistance
High-density polyethylene (HDPE) pipes are effective for the large scale transfer of liquids given that they can withstand high amounts of pressure and are unaffected by rust due to their thermoplastic quality. Unlike traditional metal pipe fittings, HDPE pipes do not rust, corrode or rot. PE pipes are also resistant to biological growth, eliminating the costly problems associated with corrosion and fouling.
  • Extended Service Life
Additionally, the lifespan of high-density plastic pipes is longer than metal pipes – which only last from 20 to 50 years. The service life of polyethylene pipe and fittings is estimated to be between 50 to 100 years depending on design, installation and application.
  • Fatigue Resistance
HDPE pipes are ductile and flexible, not rigid. This means they have outstanding resistance to fatigue. PE100 poly pipes are designed and pressure-rated to handle the usual and recurring surges that are common in water distribution systems.
  • Leak-free Joints
Traditional metal piping systems are joined with mechanical type joints or with a bell and spigot. These come with specified leakage factors that waste precious resources. Meanwhile, HDPE piping systems can be joined using heat fusion. Heat fusion involves the heating of two HDPE pipe surfaces at a specific pressure, and then allowing the PE pipe to cool, producing monolithic, permanent and leak-free pipe joints.
  • Eco-friendly Option
HDPE pipe fittings are recognised for their minimal impact on the environment. For instance, it takes less energy to manufacture HDPE pipes than their non-plastic counterparts. HDPE pipe is lightweight, making it more cost-effective to transport than metal pipes. Additionally, HDPE pipe manufacturing does not emit hazardous levels of toxins into the air during production or welding. Acu-Tech HDPE pipes are the right choice; they are durable, versatile and compatible with technology like

High-Performance Pipe Solutions for Any Industry

At Acu-Tech, we offer high-performance pipeline solutions for an expansive range of industrial applications. With more than 15 years of service, we are a highly experienced and credible company that manufactures products for all kinds of piping needs. We provide a comprehensive catalogue of HDPE pipes, fittings and other pipeline equipment. We cater to different industries’ needs, including plumbing, drainage, irrigation, infrastructure, mining, ventilation, communications, and other specialised systems. With Acu-Tech, you will find a quality piping solution that is efficient and cost-effective. Become our partner now. Send us an email at  Disclaimer: As always with information supplied by Acu-Tech Piping Systems, we supply it as a guide in the interest of better understanding of technical properties of our products. However, the application of such information may involve engineering judgements which cannot be correctly made without intimate knowledge of all the conditions pertaining to a specific installation. Acu-Tech Piping Systems does not act as a consultant in this regard; the responsibility for the use of any information or advice contained herein rests solely with the user. It should not be used in place of a professional engineer’s judgement or advice, and it is not intended as installation instructions. See full disclaimer at

Pipes are susceptible to damage due to the substances they transfer and the environmental conditions they have to withstand. For example, the sparse rainfall in the last few years has led to a change in soil moisture that can cause pipes to shift and break, leading to a waste of treated water. Investing in PE100 polyethylene pipe fittings will prevent this from happening, because PE pipe fittings have outstanding environmental and chemical stress crack resistance. Pipes that are in heavy use, notably for domestic water distribution and industrial or irrigation water systems, are especially prone to the pressure that can lead to leaks and breakage. These piping systems have to transfer considerable amounts of water to an extensive network, and changes in underground conditions can adversely affect the stability of the pipes.These pipe systems ensure that the water transferred is safe from contaminants and other harmful substances. However, there are times when the hazards come from the pipe itself. For example, in systems made of metal pipes, corrosion and rust can form when water and oxygen interact with the steel or iron, contaminating the water supply. In severe cases, the damage can weaken the pipe structure and cause the pipes to break, cutting off the water supply to the rest of the network. HDPE pipe is not affected by algae, fungi or bacteria. It is highly resistant to abrasion from any solids in suspension, such as sewer waste or mining slurry. Unlike steel pipes which require internal lining, galvanising or coating, both internally and externally. Acu-Tech’s PE100 poly pipe does not corrode or tuberculate and maintains its flow capability over time, unlike steel piping, which can rust and build up resistance to flow.Similar to urban water distribution systems, rural pipes ensure a safe and reliable source of water for irrigation and other comparable needs. Farm water quality is a priority in these systems, especially with factors like pH level and iron content. For example, high levels of calcium and magnesium salts cause water hardness, making it not only detrimental to soil but also harmful to pipes. The high calcium content can form lime encrustation (calcium carbonate) and hinder water transfer in the pipe. The nature of rural systems can also affect the pipes. For example, pressure surges when abruptly starting or stopping water flow can cause water hammer or hydraulic shocks that lead to damage unless pipes are properly secured or airlocks are allowed to escape.High-density polyethylene (HDPE) pipes are effective for the large scale transfer of liquids given that they can withstand high amounts of pressure and are unaffected by rust due to their thermoplastic quality. Unlike traditional metal pipe fittings, HDPE pipes do not rust, corrode or rot. PE pipes are also resistant to biological growth, eliminating the costly problems associated with corrosion and fouling.Additionally, the lifespan of high-density plastic pipes is longer than metal pipes – which only last from 20 to 50 years. The service life of polyethylene pipe and fittings is estimated to be between 50 to 100 years depending on design, installation and application.HDPE pipes are ductile and flexible, not rigid. This means they have outstanding resistance to fatigue. PE100 poly pipes are designed and pressure-rated to handle the usual and recurring surges that are common in water distribution systems.Traditional metal piping systems are joined with mechanical type joints or with a bell and spigot. These come with specified leakage factors that waste precious resources. Meanwhile, HDPE piping systems can be joined using heat fusion. Heat fusion involves the heating of two HDPE pipe surfaces at a specific pressure, and then allowing the PE pipe to cool, producing monolithic, permanent and leak-free pipe joints.HDPE pipe fittings are recognised for their minimal impact on the environment. For instance, it takes less energy to manufacture HDPE pipes than their non-plastic counterparts. HDPE pipe is lightweight, making it more cost-effective to transport than metal pipes. Additionally, HDPE pipe manufacturing does not emit hazardous levels of toxins into the air during production or welding. Acu-Tech HDPE pipes are the right choice; they are durable, versatile and compatible with technology like poly electrofusion fittings poly compression fittings and clamp saddles , ensuring seamless joints and high-integrity systems. The pipe’s smooth internal surface gives it a high flow and pressure capacity, enabling it to facilitate fluid transfer without the risks of obstruction or breakage.At Acu-Tech, we offer high-performance pipeline solutions for an expansive range of industrial applications. With more than 15 years of service, we are a highly experienced and credible company that manufactures products for all kinds of piping needs. We provide a comprehensive catalogue of HDPE pipes, fittings and other pipeline equipment. We cater to different industries’ needs, including plumbing, drainage, irrigation, infrastructure, mining, ventilation, communications, and other specialised systems. With Acu-Tech, you will find a quality piping solution that is efficient and cost-effective. Become our partner now. Send us an email at sales@acu-tech.com.au or contact us by visiting https://www.acu-tech.com.au/contact/ Disclaimer: As always with information supplied by Acu-Tech Piping Systems, we supply it as a guide in the interest of better understanding of technical properties of our products. However, the application of such information may involve engineering judgements which cannot be correctly made without intimate knowledge of all the conditions pertaining to a specific installation. Acu-Tech Piping Systems does not act as a consultant in this regard; the responsibility for the use of any information or advice contained herein rests solely with the user. It should not be used in place of a professional engineer’s judgement or advice, and it is not intended as installation instructions. See full disclaimer at www.acu-tech.com.au/privacy-policy/.

The company is the world’s best uhmwpe mining pipe supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.