When we use stainless steel metal hoses, in addition to reading the instructions, we also need to pay attention to many things. Let the editor introduce them to us.
When we use stainless steel metal hoses, in addition to reading the instructions, we also need to pay attention to many things. Let the editor introduce them to us.
1. For movable piping, the reciprocating bending radius b shall be no less than the static piping. The connection operation shall be carried out on the principle of no less than the bending radius b.
2. When connecting pipes, please avoid twisting the pipe body, because the pipe body itself cannot absorb twisting and deformation. When connecting in the form of flange, please install and fix the flange side first. In addition, when connecting with threads, further tightening is required. When doing so, please be careful not to allow the tube body to become twisted or deformed.
3. Please do not install the stainless steel metal hose in a compressed state. For the pipe body with a mesh sleeve on the outside, the braided mesh sleeve is an important pressure-resistant component. After installation in a compressed state, the mesh sleeve cannot be fully tightened and is in a state of compression. When operated in a relaxed state, the pressure-bearing strength of the pipe body will be reduced, which is very dangerous.
4. Please confirm the seal. For products sealed with seals, please confirm whether the product body is equipped with seals.
5. Please use seals for stainless steel metal hoses. Some product seals are provided by the manufacturer as standard accessories. Please be sure to use these accessories. Use of seals other than standard accessories may cause leakage. When performing replacement operations, If the material changes, please contact us at any time.
The above is the editor's introduction to us. What do you need to pay attention to when using stainless steel metal hoses? I hope the editor's share is enough to help you use metal hoses.